| |
| · 防制電磁乾擾用磁芯 |
| ·EMI / INDUCTOR TOROIDAL CORES T TYPE |
| ·EMI SLEEVE CORES RH TYPE |
| ·EMI RP TYPE |
| ·EMI RPS TYPE |
| ·組裝式夾扣 |
| · 調頻式用磁芯 |
| ·THREAD TH TYPE |
| ·THREADED CUP THP TYPE |
| · 繞線式用磁芯 |
| ·COIL FORM DRWW TYPE |
| ·COIL FORM DR4W TYPE |
| ·COIL FORM DR3W TYPE |
| ·COIL FORM DR2W TYPE |
| ·COIL FORM RWW TYPE |
| ·BOBBIN DR TYPE |
| ·ROD CORE R TYPE |
| ·T |
| · 貼片式用磁芯 |
| ·SMD POWER CHOKE SILVERING I TYPE |
| ·CT鍍銀系列 |
| ·SLF |
| |
| == 友情鏈接 == |
 |
| |
|
| 產品庫 → 所有產品 → 產品詳細介紹 |
| |
 |
產品名稱： |
ROD CORE R TYPE |
| 是否新產品： |
是
|
| 所屬種類： |
绕线式用磁芯 |
| 所屬小類： |
R |
| 產品說明： |
Features :
Generally, Ferrite Rods are used as the core of solenoidal Coils for two main functions: Tuning: moving the core adjusts the coil to the required inductance value (L). Advantages of the open circuit are high Q and a good temperature stability. EMI suppression: the coil can carry a high DC current without being saturated because of the open magnetic circuit. In most cases, the frequency range will not be limited by the material, but by the coil capacitance. Curvature and mechanical tolerances of the standard range ful fill the requirements international standard.The L value and Q-factor are measured (up to 6 mm outer diameter) in a standard coil. For solenoidal coils, open circuit, No self shielding and not easy to saturate with DC.
Applications :
Tubes can be used in solenoid coils with almost the same effect as Rods. The inner hole is often used to insert wires to make a ferrite coil former. In EMI suppression applications tubes can also be shifted over wires. Because the magnetic flux path is then closed, a steep increase in impedance results. In such cases howerver the sensitivity for DC is rather high. Curvature and mechanical tolerances of the standard range fulfill the requirements of DIN 41291. |
| 發布時間： |
2005/5/30 15:26:12 |
|
| |
 |
| |
|
